
UAS Flight Test Engineer
Flytrex · Corinth, TX, United States · Onsite
- Software & SaaS
- 51–200 employees
- Tel Aviv, Israel
Strong hiring record · median 0 days open
- First seen
- 16 November 2026
- Reposted
- Not since September 2026
- Last checked
- Today · still on the employer's board
All reasons
In its favour
- Posted today
- Still listed on the employer's own board
Description
🔹UAS Flight Test Engineer
🔹HQ Based in Pilot Point, TX | Full-Time | On-Site
TAKE YOUR CAREER TO NEW HEIGHTS WITH FLYTREX!
✨ Who We Are
Flytrex is revolutionizing suburban on-demand delivery from the skies up, literally. As the leading drone delivery company in the U.S., we're scaling our operations across Dallas–Fort Worth, bringing ultrafast, on-demand delivery to doorsteps via autonomous aircraft.
✨ The Opportunity
We're looking for a builder
a hands-on flight test engineer who loves getting real aircraft in the air.
As our UAS Flight Test Engineer, you'll tune ArduPilot/PX4 flight controllers, run R&D flight tests, and troubleshoot autonomous delivery drones at our Pilot Point Flight Test Facility. You'll split your time between the test field and the lab bench, where software meets the real world.
If you have deep technical curiosity, sharp problem-solving instincts, and an unwavering commitment to safety, this role is for you.
✨ What You'll Do
🔹
Flight Systems & Tuning
Configure, tune, calibrate, and validate Flytrex flight controllers and supporting avionics hardware.
🔹R&D Flight Testing
Plan and execute flight tests for new aircraft features, following procedures, safety checklists, and operational protocols.
🔹Systems Integration & Lab Testing
Integrate and bench-test UAS hardware and software, including sensor calibration, payload integration, and hardware-in-the-loop (HIL) simulation.
🔹Flight Software & Mission Operations
Use Flytrex Flight Control Software for mission planning, real-time telemetry monitoring, and post-flight data analysis.
🔹Root Cause & Fault Analysis
Diagnose flight anomalies, hardware faults, and software issues found during testing.
🔹Fleet Readiness & Maintenance
Keep flight test aircraft, hardware, and ground support equipment ready to fly.
🔹Engineering Documentation
Maintain test logs, reports, and anomaly tickets, and recommend improvements to our procedures.
🔹Airspace Safety & Compliance
Manage ground and air risk in full compliance with 14 CFR Part 107 and all applicable aviation safety standards.
✨ Why Join Flytrex?
🔹Be part of a category-defining company at the forefront of autonomous delivery.
🔹Join a high-growth, high-impact aerospace startup with real-world daily operations.
🔹Work hands-on with bleeding-edge UAS avionics, autonomy, and flight testing platforms.
🔹A fast-paced, collaborative, and mission-driven team environment.
Ready to Help Shape the Future of Delivery?
👉 Join Flytrex and be part of what's next in autonomous delivery!
Learn more about
Flytrex
Requirements
✨ What You'll Bring
🔹
Hands-on experience configuring, tuning, and troubleshooting ArduPilot or PX4 flight controllers (e.g., Pixhawk), OR 2+ years of hands-on UAS or aircraft avionics integration and maintenance (e.g., military UAS, A&P, avionics technician) with a strong drive to learn autopilot tuning.
🔹Strong troubleshooting skills across electro-mechanical, avionics, and software faults, in both field and lab settings.
🔹FAA Part 107 Remote Pilot Certificate, or the ability to obtain it within 60 days of hire.
🔹Comfort working on-site in Pilot Point, TX and outdoors in varying weather conditions; ability to handle equipment and lift up to 50 lbs, with or without reasonable accommodation.
🔹Valid driver's license with a clean driving record subject to background review.
🔹U.S. citizenship is required.
✨ Nice to have
🔹
Proficiency with Mission Planner, QGroundControl, or an equivalent ground control station.
🔹Technical degree in Aerospace Engineering, Electrical Engineering, Robotics, Computer Science, or equivalent hands-on experience.
🔹Python for data analysis, scripting, and workflow automation, including flight log analysis (.bin/.tlog/ULog).
🔹Familiarity with MAVLink, MAVSDK, ROS, DroneKit, or similar autonomy/robotics frameworks.
🔹Experience with Hardware-in-the-Loop (HIL) or Software-in-the-Loop (SIL) simulation environments.
🔹Clear Flight logs and test documentation, Jira for anomaly tickets, maintenance workflows, and R&D test tracking