PLM and CAM/CAI Integration Engineer

Immediate need for a talented PLM and CAM/CAI Integration Engineer. This is a 06+months contract opportunity with long-term potential and is located in Costa Mesa , CA (Hybrid). Please review the job description below and contact me ASAP if you are interested.

Job ID

26-34798

Pay Range

$90/hr - $95/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).

Key Responsibilities

• Configuring the NX CAM environment: customer defaults, templates, operation and geometry templates, and the configuration that makes programming from a released MBD source model the default path
• Building and governing the tooling, fixturing, and machine library as managed Teamcenter objects - versioned, validated against physical assets, and updatable through a defined governance path - so programmers select from a current library rather than re-create assets per program
• Developing and verifying post-processors for the machine tools in scope against the physical machines, with a verification record per post-processor covering motion types, cycles, and controller behavior
• Configuring CAM-to-model associativity in Teamcenter, binding CAM programs to specific item revisions and defining the action raised when a source model revises
• Configuring post-processing and DNC delivery within Teamcenter so NC output is a controlled object tied to the program revision and machine, and delivery to the machine controller runs from the system rather than from a file share or programmer desktop
• Implementing Vericut integration with NX CAM and Teamcenter, including simulation result management and verification gating
• Implementing Third Wave Systems integration, including the feedback path that returns optimized parameters to the CAM program and cutting-data library without manual re-entry
• Implementing InnovMetric PolyWorks integration, including the model and characteristic data path into PolyWorks and the result return path into Teamcenter with characteristic identity and item revision preserved
• Defining and implementing integration architecture for non-NX CAM and non-PolyWorks CAI platforms against the same Teamcenter data model, with the same traceability and release behavior
• Implementing Teamcenter business objects, item types, dataset types, relations, revision rules, status behavior, workflows, and access rules per the approved configuration design
• Executing migration of existing CAM programs, post-processors, machine models, tooling libraries, simulation assets, and inspection assets into managed Teamcenter configuration
• Interviewing CAM programmers, manufacturing engineers, machinists, metrology engineers, and quality engineers to elicit requirements, and translating those into Teamcenter configuration designs and integration architecture specifications before configuration work begins
• Delivering configuration documentation sufficient for an administrator to perform a defined configuration change unaided
• Authoring and delivering user documentation, work instructions, and training curricula for CAM programmers, manufacturing engineers, machinists, and metrology staff
• Maintaining the residual-gap register identifying every capability the delivered environment does not yet support, with a recommended closure path for each item
• WHAT THIS ROLE DOES NOT OWN
• Stated explicitly, because the scope is broad.
• Production CAM programming of parts. Programs produced under this role are validation and reference cases, not production release deliverables.
• Authorship of manufacturing methods and process definitions. The configured environment supports methods defined elsewhere; this role builds the environment.
• NX Open custom tooling development beyond the configuration and integration scripting required by the tool standup. Bespoke automation is a separate scope.
• Procurement of software licenses, hardware, or metrology equipment.
• Authorship of general MBE standards, style guides, or cross-program MBE training curricula. Tool-specific documentation and training remain in scope.
• Engineering management. You will have no direct reports.

Key Requirements and Technology Experience

• Key skills; PLM, NX CAM , GD&T
• 8 or more years implementing, configuring, and integrating Teamcenter in a production manufacturing environment, with demonstrated experience covering business object and data model definition, dataset types, relations, revision rules, status and release behavior, workflow design, and access manager rules.
• Teamcenter administration without configuration depth does not satisfy this requirement.
• Demonstrated NX CAM implementation experience, including environment configuration, templates, machine models and kinematics, tooling and cutting-data library management, and post-processor development and verification against physical machines.
• Demonstrated Vericut implementation experience, including machine and control configuration, integration with a CAM system and a PLM or PDM system, and verification result management.
• Demonstrated experience integrating machining process modeling or optimization software into a CAM and PLM environment.
• Third Wave Systems experience is the strongest signal; comparable optimization toolchain integration is considered.
• Demonstrated InnovMetric PolyWorks implementation experience, including PolyWorks data management and integration with PLM for inspection result return with item revision and characteristic identity preserved.
• Working knowledge of machining practice sufficient to verify that a post-processor output, a simulation configuration, and an optimization result are technically correct rather than merely syntactically valid.
• You must be able to evaluate the output, not just the process that produced it.
• Working knowledge of GD&T per ASME Y14.5 and of model-based inspection practice, sufficient to configure characteristic data paths correctly and evaluate whether the inspection data that returns to Teamcenter is the right data in the right form.
• Demonstrated experience conducting stakeholder interviews with engineering and manufacturing domain experts and translating the outputs into written, reviewable requirements and configuration design specifications.
• Demonstrated experience migrating legacy manufacturing assets into managed PLM configuration, including handling assets of uncertain provenance.
• Able to be on site in Costa Mesa regularly. This role does not work remotely.
• U.S. Person status is required, as this position needs to access export controlled data.
• Experience with Teamcenter Manufacturing, Shop Floor Connect, or Teamcenter Quality, and with how manufacturing BOM, routing, and work instruction data are managed within Teamcenter rather than alongside it.
• Experience with QIF (ISO 23952) as a measurement data exchange format, including the Client limitations of specific tool-to-tool exchanges and how to state those limitations in architecture documentation.
• Experience integrating a Teamcenter-managed CAM and inspection environment with a manufacturing execution system such as Forge, Siemens Opcenter, or Solumina/iBase-t, specifically for work order, program delivery, and inspection result consumption.
• Experience with the Staged Modeling process or an equivalent stage-based manufacturing model practice in NX, and with how staged models are consumed as CAM source geometry.
• Familiarity with the NSE MBE Maturity Index and what practice distinguishes Level 4 (Trusted MBD) and above from lower states, applicable to Teamcenter configuration and tool integration design.
• Experience with MIL-STD-31000 Technical Data Packages and AS9102 First Article Inspection, and with how those requirements shape what must be managed and traceable in a Teamcenter configuration.
• Experience in shipbuilding, submarine construction, aerospace, or another highly regulated manufacturing environment where configuration changes require documented evidence of test and promotion.
• Experience with NX Open scripting for configuration and integration tasks, at the level of writing or modifying scripts that bind to a Teamcenter data model.
• Prior experience in a greenfield PLM and CAM environment standup, as opposed to extending or maintaining an established configuration

Our client is a leading Defense Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration.

Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

#was1