MB-Quality Applications Engineer

Immediate need for a talented MB-Quality Applications Engineer. This is a 06 Months Contract opportunity with long-term potential and is located in Costa Mesa, CA (Onsite). Please review the job description below and contact me ASAP if you are interested.

Job ID

26-34796

Pay Range

$100 - $110/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).

Key Responsibilities

• Authoring and maintaining controlled inspection procedures, NDT technique sheets, and metrology work instructions, released under change control against specific item revisions
• Defining and proving model-based CMM and inspection programming methods from PMI-bearing NX models, on real part geometry
• Building the characteristic-to-inspection traceability model and the data return specification that closes the loop from TDP characteristic through to result in Teamcenter and Forge
• Validating deployed quality tools and performing production-readiness assessments, including consumption testing across PLM, CAD, CAM, CAI, and MES integration points
• Operating help-desk and support for deployed model-based quality tools: resolving user issues, debugging workflows, and coordinating defect resolution with vendors
• Evaluating software enhancements and platform updates - NX releases, PMI functionality changes - before they enter the production environment, and integrating approved changes into the tool roadmap
• Executing Gauge R&R and measurement systems analysis studies and building calibration governance across the metrology estate
• Digitizing and structuring legacy NDT technique sheets, procedure sets, and personnel qualification records, and governing NDT certification currency
• Writing and maintaining the tool gap register and backlog-ready requirements for each prioritized deficiency, and tracking closure through the receiving product teams
• Assessing inspection, NDT, and metrology discipline maturity against the NSE MBE Maturity Index and producing the sequenced roadmap between current state and target
• Developing and delivering training materials differentiated by audience - quality engineers, technicians, supplier quality personnel - and maintaining competency records
• Working with Manufacturing, Operations, Supplier Quality, and Digital Technologies teams to understand their digital maturity and provide troubleshooting and adoption support
• Collaborating with software vendors to guide development, enhancement prioritization, and long-term tool evolution
• Providing technical representation at design reviews, audits, customer reviews, and supplier assessments, with written findings and actions from each

Key Requirements and Technology Experience

• 8 or more years in quality engineering, manufacturing engineering, metrology, or NDT, in aerospace, naval or maritime, medical device, defense, or another highly regulated manufacturing environment,
• with recent years owning methods development and standard work authoring rather than production execution.
• Demonstrated hands-on experience authoring and maintaining controlled standard work - procedures, work instructions, technique sheets - for a quality or manufacturing discipline, released under formal change control and tied to item revisions.
• Working proficiency in model-based inspection programming on at least one platform in use in the industry: Zeiss Calypso, Hexagon PC-DMIS, CAMIO, PolyWorks Inspector, or comparable. You have personally written inspection programs that run on a CMM or portable arm, not just managed people who do.
• Working knowledge of GD&T per ASME Y14.5, characteristics per the DMSC MBC standard, and how both map to inspection planning and inspection programming. You can make specific decisions about how a datum reference frame becomes a measurement setup.
• Familiarity with destructive and non-destructive testing methods as applied to structural metallic parts: at minimum awareness of the applicable methods, technique sheet structure, and personnel qualification requirements under NAS410 or ASNT SNT-TC-1A.
• Working knowledge of measurement systems analysis: you have planned and executed Gauge R&R studies and can explain what the result means for a measurement decision.
• Ability to read and work with model-based definition data formats: STEP AP242, QIF, and JT, and specifically how PMI and characteristics are carried in each for inspection use.
• Experience performing tool validation or production-readiness assessment for deployed quality or engineering software, including consumption testing and defect documentation.
• On site, Costa Mesa, California; remote exceptions at management discretion for exceptional candidates
• Direct, hands-on experience with Siemens NX at the level of PMI reading and model completeness assessment, and with Teamcenter or Active Workspace at the item revision and dataset level.
• NDT Level II or Level III certification in one or more methods (UT, RT, MT, PT, ET), or demonstrated experience managing a multi-method personnel certification program to NAS410, ASNT SNT-TC-1A, or CP-189.
• Experience with large-volume metrology - laser tracker, structured-light scanning, photogrammetry - applied to ships, hull sections, or other large fabricated structures, including measurement uncertainty estimation.
• Experience with a manufacturing execution or digital-thread platform such as Forge, Siemens Opcenter, or Solumina/iBase-t, and with how inspection data returns to those systems.
• Experience with MIL-STD-31000 Technical Data Packages and AS9102 First Article Inspection.
• Background in shipbuilding, submarine construction, aerospace structures, or another large discrete assembly environment with complex inspection and NDT regimes.
• Experience with Palantir Foundry or a comparable data integration platform used for quality data analytics or digital-thread pipelines.

Our client is a leading Defense technology Industry and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration.

Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

#was